-
BHR-1 Hose ramp with angled sides. Center cavity designed for 2″ PVC pipe. -
CG-HD Heavy-duty corner guards with reflective chevrons to increase visibility. -
CP-HD-2 Two channel heavy-duty cable protector with attached lid. Supports weights up to 12 tons. -
CP-HD-3 Three channel heavy-duty cable protector with attached lid. Supports weights up to 40 tons. -
CP-HD-5 Five channel heavy-duty cable protector with attached lid. Supports weights up to 40 tons. -
CP-SD-2 Two channel standard duty cable protector with attached lid. Supports weights up to 5 tons. -
CP-SD-3 Three channel standard duty cable protector with attached lid. Supports weights up to 12 tons. -
CP-SD-5 Five channel standard duty cable protector with attached lid. Supports weights up to 9 tons. -
DH-CP-3 Drop over cable protector with 1.5″x0.5″ channel. Perfect for offices or homes. -
DH-CP-4 Drop over cable protector with 4″x1.25″ channel. Perfect for offices, fairs or festivals. Drop over cable protector with 1.5″x0.5″ channel. Perfect for offices or homes. -
DSSB-36 Splashblock with edge on three sides, one open edge. -
FS-1 Lag and shield fastener system for attaching products to concrete. -
FS-3 Galvanized spike and washer for use on asphalt, gravel or dirt surfaces. -
GS-20 Parking stop with smooth finish and reflective stripe. -
Lane Separator High UV, modular, visible and can be used without being fixed down. -
LS-25 Pedestrian crossing sign attached to flexible post on a durable rubber base. -
LY-25 Pedestrian crossing sign attached to flexible post on a durable rubber base. -
MWC-14 Military aircraft wheel chock (14″) with 3/8″ rope and lanyard system. -
MWC-20 Military aircraft wheel chock (20″) with 3/8″ rope and lanyard system. -
-
-
QFSS-20 Quick Fence Safety System with 20-lb. sign bases. -
QFSS-30 Quick Fence Safety System with 30-lb. sign bases.
-
SB-20 Square sign base with molded center hole with PVC cap insert. -
SB-30 Octagonal sign base with 1 ½” molded center hole. -
-
SB-30W Octagonal base with molded 1 ½” hole, two wheels attached on one side. -
SB-60 Octagonal sign base with 1 7/8” molded center hole. -
SB-60W-HD New heavy duty 60 lb. recycled rubber sign base with 5” rubber wheels. -
SB-90 Octagonal base with circular footprint extender base bolted on using hex-head lag screws. -
-
-
SMB-112 Sign mounting brackets designed for use with 1 ½” PVC post. -
SMB-2 Sign mounting brackets designed for use with 2″ PVC pipe. -
Speed Spots A portable speed bump system designed to quickly reduce traffic speeds and protect lives -
SS-25 Pedestrian crossing sign attached to flexible post on a durable rubber base. -
SWC-7 7″ smooth wheel chock ideal for recreational vehicles or yard equipment. -
TCT-CheckerMat Raised diamond checks on one side of the mat. Extremely durable and flexible. -
TCT-HDMat 8-10mm high-density, smooth, flat, quality recycled rubber mat. -
TCT-LDMat 6mm low-density, smooth, flat, quality recycled rubber mat.
-
TCT-LineMat 5mm grooved on one side, quality recycled rubber mat. -
TCT-SquareMAT 8mm diamond patterned surface on one side, quality recycled rubber mat. -
U-Channel Adaptor Black post with holes and welded square base. Made to anchor U-Channel posts. -
U-Channel Post U-Channel post for use with sign bases. Available in heights of 4′, 5′, 6′ or custom. -
VR-206-7E Rubber speed bump ends that coordinate with VR-206-7E. -
VR-206-7M Rubber speed bump middle section – half yellow, half black. -
VR-206-9E Black rectangular end piece sold in sets of two. -
VR-206-9M Black rectangular speed hump with eight reflective squares. -
WCR-5 Standard ribbed two-sided pyramid wheel chock with eye-hook. -
WCR-7 Standard ribbed one-sided contoured wheel chock with eye-hook. -
WCR-9 Standard smooth, two-sided pyramid wheel chock with eye-hook. -
WS-6-B Parking stop with four holes molded into the top for easy installation. -
WS-6-Y Parking stop with four holes molded into the top for mounting.