-
Ballistic Tiles Durable recycled rubber tiles for ballistic ranges. -
Base Square-shaped base with rectangle cut-out for key block to fit & lock system. -
BHR-1 Hose ramp with angled sides. Center cavity designed for 2″ PVC pipe. -
CG-HD Heavy-duty corner guards with reflective chevrons to increase visibility. -
Corner Piece Corner piece with rectangle cut-outs for key blocks to fit in & lock system. -
CP-HD-2 Two channel heavy-duty cable protector with attached lid. Supports weights up to 12 tons. -
CP-HD-3 Three channel heavy-duty cable protector with attached lid. Supports weights up to 40 tons. -
CP-HD-5 Five channel heavy-duty cable protector with attached lid. Supports weights up to 40 tons. -
CP-SD-2 Two channel standard duty cable protector with attached lid. Supports weights up to 5 tons. -
CP-SD-3 Three channel standard duty cable protector with attached lid. Supports weights up to 12 tons. -
CP-SD-5 Five channel standard duty cable protector with attached lid. Supports weights up to 9 tons. -
Curb Ramps Designed to handle the heavy weignt of a Semi-Truck, Cement Truck and a RV. -
DD-44 Rubber base with yellow safety striping and two orange plastic posts. -
DH-CP-3 Drop over cable protector with 1.5″x0.5″ channel. Perfect for offices or homes. -
DH-CP-4 Drop over cable protector with 4″x1.25″ channel. Perfect for offices, fairs or festivals. Drop over cable protector with 1.5″x0.5″ channel. Perfect for offices or homes. -
DSSB-36 Splashblock with edge on three sides, one open edge. -
Dual Side – Decorative Stepping-Stone Click link for purchase information -
Extension Blocks Extension block will fit into base to increase height of containment system. -
Friendly Flagger The Friendly Flagger from TCT is a conceptual design featuring TCT’s unique sign bases. The Friendly Flagger is designed for construction workers to use on-site to control the flow of traffic. With the Friendly Flagger, worker’s comfort is top priority. The design accommodates most 18” and 24” signs. The PVC staff has predrilled holes and cut-out for easy sign assembly. The staff is then simply dropped inside a PVC sheath, from which it swivels. -
FS-1 Lag and shield fastener system for attaching products to concrete. -
FS-3 Galvanized spike and washer for use on asphalt, gravel or dirt surfaces. -
Grill Mats Protect your deck with UV resistant, non-crack, non-deteriorating grill mat. -
GS-20 Parking stop with smooth finish and reflective stripe. -
Key Block Rectangle-shaped block, fits into base to lock containment system together. -
Lane Separator High UV, modular, visible and can be used without being fixed down. -
LS-25 Pedestrian crossing sign attached to flexible post on a durable rubber base. -
LY-25 Pedestrian crossing sign attached to flexible post on a durable rubber base. -
MWC-14 Military aircraft wheel chock (14″) with 3/8″ rope and lanyard system. -
MWC-20 Military aircraft wheel chock (20″) with 3/8″ rope and lanyard system. -
Pop-lock™ tile system Durable recycled rubber tiles for ballistic ranges. -
-
-
QFSS-20 Quick Fence Safety System with 20-lb. sign bases. -
QFSS-30 Quick Fence Safety System with 30-lb. sign bases.
-
Railroad Tile Stepping Stone Click link for purchase information -
Roof Barrier New Innovation - Patent Pending - Click for more information -
Rubber Shipping Cradles Durable recycled rubber tiles for ballistic ranges. -
RubberMAT Edging Rubber Mat Edging -
RubberPAVE RubberPAVE -
SB-20 Square sign base with molded center hole with PVC cap insert. -
SB-30 Octagonal sign base with 1 ½” molded center hole. -
-
SB-30W Octagonal base with molded 1 ½” hole, two wheels attached on one side. -
SB-60 Octagonal sign base with 1 7/8” molded center hole. -
SB-60W-HD New heavy duty 60 lb. recycled rubber sign base with 5” rubber wheels. -
SB-90 Octagonal base with circular footprint extender base bolted on using hex-head lag screws. -
-
-
Slate Stepping-Stone Click link for purchase information -
SMB-112 Sign mounting brackets designed for use with 1 ½” PVC post. -
SMB-2 Sign mounting brackets designed for use with 2″ PVC pipe. -
Speed Spots A portable speed bump system designed to quickly reduce traffic speeds and protect lives -
SS-25 Pedestrian crossing sign attached to flexible post on a durable rubber base. -
SWC-7 7″ smooth wheel chock ideal for recreational vehicles or yard equipment. -
TCT-CheckerMat Raised diamond checks on one side of the mat. Extremely durable and flexible. -
TCT-HDMat 8-10mm high-density, smooth, flat, quality recycled rubber mat. -
TCT-LDMat 6mm low-density, smooth, flat, quality recycled rubber mat.
-
TCT-LineMat 5mm grooved on one side, quality recycled rubber mat. -
TCT-SquareMAT 8mm diamond patterned surface on one side, quality recycled rubber mat. -
The Stand Box Patent number: 11,585,056 - Click for more information -
U-Channel Adaptor Black post with holes and welded square base. Made to anchor U-Channel posts. -
U-Channel Post U-Channel post for use with sign bases. Available in heights of 4′, 5′, 6′ or custom. -
VR-206-7E Rubber speed bump ends that coordinate with VR-206-7E. -
VR-206-7M Rubber speed bump middle section – half yellow, half black. -
VR-206-9E Black rectangular end piece sold in sets of two. -
VR-206-9M Black rectangular speed hump with eight reflective squares. -
-
WCR-5 Standard ribbed two-sided pyramid wheel chock with eye-hook. -
WCR-7 Standard ribbed one-sided contoured wheel chock with eye-hook. -
WCR-9 Standard smooth, two-sided pyramid wheel chock with eye-hook. -
WS-6-B Parking stop with four holes molded into the top for easy installation. -
WS-6-Y Parking stop with four holes molded into the top for mounting.